USAfixTM - Repair Guide (RG) - Master

Email RG

- Replace the brush bearing(s)

Level of Difficulty - Medium	Estimated Completion Time - 25 minutes
TASKI - SWINGO 350B
	Tools Required Tool   Ratchet-Socket metric 10mm Snap ring pliers
	Parts Required Part Description Price Available Purchase 192-1873 Ball bearing $30.99 Back Order Qty: 192-3736 Flanged bearing $48.74 Back Order Qty: 192-8876 Pulley $50.58 Back Order Qty:

Step   Procedure & Parts & Tools 1 TURN TO REMOVE THE KNOB. 2 SLIDE THE BRUSH ROLL COVER OFF THE BRUSH DECK. 3 SET THE MACHINE UP ON THE KICKSTAND AND SLIDE THE BRUSH ROLL OUT OF MACHINE. 4 LAY THE MACHINE SO THE BRUSH PULLEY IS FACING UP. REMOVE THE 3 SCREWS HOLDING THE PULLEY. Ratchet-Socket metric 10mm 5 PULL THE BRUSH PULLEY FROM THE MACHINE. 6 REMOVE THE SNAP RING. Snap ring pliers 7 USING A PRESS, CAREFULLY APPLY PRESSURE TO THE PULLEY. THE BOTTOM BEARING WILL COME OUT OF THE BOTTOM OF THE PULLEY. 8 USING A PRESS,CAREFULLY APPLY PRESSURE TO THE 2ND BEARING TO REMOVE IT FROM THE BRUSH PULLEY. 9 NOTE: THIS PICTURE SHOWS THE BRUSH PULLEY PARTS AND THE REMOVED BEARINGS. 10 REVERSE STEPS 1 THRU 8 TO REPLACE THE BRUSH BEARINGS AND TO REASSEMBLE THE MACHINE. Part Description Price Qty 192-1873 Ball bearing $30.99 Qty:   192-3736 Flanged bearing $48.74 Qty:   192-8876 Pulley $50.58 Qty: